Jännitemittari FlySky:n vastaanottimille. Mittaa jännitteen aina 100V asti ja jännitteen saa radion ruudulle telemetrian kautta. Voidaan kytkeä useita sarjaan. Johdoissa liittimet, jolla voidaan kytkeä suoraan akun tasausliittimeen....

I-Bus Channel Expander...

Optical Rotation Speed Telemetry For FS-iT4 Transmitter...

Normaali 2 dB antenni lähettimelle....

Pidempi 5 dB antenni lähettimelle. Parempi lähetys/vastaanotto....

FrSky Sensor Hub connects digital side port (G, TX, RX) of FrSky telemetry receiver and FrSky sensors by the provided cable, to serve as an information collecting and processing center, monitor the model status and feedback all data back to FrSky telemetry module...

FrSky Air Speed Sensor high precision, Smart Port enable....

FrSky Air Speed Sensor normal precision, Smart Port enable....

Anturi akun jännitteen valvontaan. Voit tällä valvoa esim. ajoakun jännitettä ja asettaa haluamasi hälytyspisteet lähetinmoduulille eri jännitteille. 0V~19.8V....

Dimension: 45*21*7mm Weight: 5.2g Measurement range: 1S~6S (The first lipo voltage should be more than 3.55V) Cell voltage display range: 0.20~4.20V. Smart Port vastaanottimille voi käyttää myös ilman vastaanotinta akkutesterinä....

By removing the OLED screen from the original FLVSS and reconfiguring the remaining circuit FrSky has managed to reduce the size and weight of the original by almost 50% which is ideal for smaller aircraft models. The functionality of the MLVSS is identical to that of the FLVSS except that you ...

Dimension: 29×20×2mm Weight: 6.7g Operational Voltage: DC 4 -10 V Current consumption: 25mA@5V Voltage range of the motor wires: 2 to 12S RPM range (for 2 poles brushless motor): 1000rpm to 300000rpm Measurement Range: -20~250 degrees Celsius/ -4~482 degree...

FrSky mounting stand for DHT-U/FLD-02...

Connect one or two receivers in redundancy mode. Connect 1-2 LiPo batteries, two for redundacy.  Overload (over 2,6A continous / 8A for 2,5s) protection for each channel. Upto 16 PWM ch (normal servos) from a single S-bus RX. Telemetry feedback for voltage, current, capasity and overload indica...

1) Configure S6R/S8R/Sensors wirelessly with Free Link  2) USB mode: Configure S6R/S8R/Sensors with PC software  3) UPGRADE mode (with S.Port2 ): Upgrade S.Port products  4)  CONFIG mode (with S.port1): Receive and set the telemetry data for S6R/S8R/Sensors...