Product Description:
(1) The main controller uses an STM32H743, FC firmware Betaflight (factory default), supports INAV. The ESC employs a 32-bit MCU, with a high-performance hardware configuration of 70A 4IN1, ensuring continuous and stable operation.
(2) Paired with a high-performance FC, it supports 8S 3115 680KV or 6S 3115 900KV high-power brushless motors. Utilizing 10-inch propellers achieves optimal long-range flight efficiency.
(3) Equipped 7mm thick arms and a wide X design that reduces low-frequency noise and prevents resonance, providing 3 sets of battery strap positions to accommodate various battery sizes.
(4) The mid-plate flight controller's fully enclosed design protects the core components from interference.
(5) Features true diversity dual antennas receiver + omnidirectional signal reception.
(6) Equipped with 18cm video transmission dual antennas, maximizing long-range flight distance.
(7) Achieves a flight endurance time of up to 50 minutes for efficient long-distance travel.
(8) Equipped with a fixed XT90 power connector for easier power-up.
(9) Large-area GPS antenna for faster satellite acquisition.
(10) Supports DJI O4 AIR UNIT Pro for an HD flight experience.
(11) Rear-mounted TYPE-C programming port for convenient parameter adjustment.
Parameters of Product:
|
Product Name |
Flyson10 |
|
Rack structure |
Wide X-Link |
|
Wheelbase |
430mm |
|
Arm thickness |
7mm |
|
Motor |
6S 3115 900KV |
|
Propeller |
Gemfan 1050 |
|
Main Controller |
STM32H743 |
|
Gyroscope |
ICM-42688P |
|
ESC |
32-bit 70A 4IN1 |
|
OSD Chip |
AT7456E |
|
Black Box |
16MB |
|
Working Voltage |
4-8S(14V-35V) |
|
Receiver |
PNP, ELRS 2.4G DUAL, ELRS 915M DUAL |
|
Image Transmission |
DJI O4 AIR UNIT PRO, Simulation |
|
Antenna Of Image Transmission |
5.8G circular polarized antenna, LHCP 18cm * 2 |
|
FC Firmware |
Betaflight (default), supports INAV |
|
GPS |
M10-25Q |
|
Buzzer |
Yes |
|
Recommend Battery |
6S LiPo/LiHV 5000-16000mah 8S LiPo/LiHV 5000-16000mah |
|
Video Recording (DJI O4 Pro) |
Supports up to 4K 120 frames |
|
Parameter Adjustment Port |
Rear TYPE-C parameter tuning |
|
Battery Interface |
XT90 fixed type |
|
Weight (excluding battery) |
1215g |
Package included:
DJI O4 Pro Version:
Flyson10 x 1
Gemfan 1050 propeller x 2
20 * 320mm ties x 2
18cm LHCP circular polarized antenna x 2
Silicon anti-slip pad for battery x 1
M5 * 20 half round head hexagonal screw x 1
M5 nut x 1
USB data cable x 1
H2 wrench x 1
H3 wrench x 1
Propeller wrench x 1
Instruction manual QR code x 1
DJI O4 Pro antenna x 2 (when choose O4 Pro version)
Analog Version:
Flyson10 x 1
Gemfan 1050 propeller x 2
20 * 320mm ties x 2
18cm RHCP circular polarized antenna x 2
Silicon anti-slip pad for battery x 1
M5 * 20 half round head hexagonal screw x 1
M5 nut x 1
USB data cable x 1
H2 wrench x 1
H3 wrench x 1
Propeller wrench x 1
Instruction manual QR code x 1
-
Hinta: € 20,72 -
Hinta: € 30,84 -
Hinta: € 11,95
-
Hinta: € 14,92
