- Kategoriat
- Info
Kategoriat
Hall Gimbal
The nano gimbal with hall sensor is released, featuring four precision bearings, adjustable spring tension, and ergonomic stick ends for an unparalleled feel. With an adjustable stick end, it perfectly fits thumbs and improves the stick feel for the control. Hall Effect provides contactless sensing for not only accurate control inputs and precise centering but also durable use.
Note: Please upgrade your Literadio 3/2 SE to the latest version before replacing it. For the Litereadio 2 SE without BETAFPV configurator supported sticker (old version Literadio 2 SE) and Literadio 2, upgrading the newest firmware is unavailable, which is not compatible with the hall gimbal and only supports the potentiometer gimbal.
Firmware: https://github.com/BETAFPV/LiteRadio_PLUS/releases
BETAFPV Configurator: https://github.com/BETAFPV/BETAFPV_Configurator/releases
Potentiometer or Hall Gimbal
The main difference between the two gimbals is the sensor. The potentiometer gimbal contains several electronic components that increase or decrease the level of resistance when moving. Compared with potentiometer gimbals, hall gimbals use a magnetic system, which has no wear from physical contact.
Potentiometer Gimbal | Hall Gimbal | |
Sensor | Potentiometer | Hall Effect |
Stick ends | Adjustable | Adjustable |
Spring tension | Not adjustable | Adjustable |
Size | 35mm*42mm | 35mm*42mm |
Supported TX | Literadio 3/2 SE | Literadio 3/2 SE |
Wiring Diagram
Below is the connection diagram for the potentiometer gimbal. Here is the example on Literadio 2 SE (mode 2).
Below is the connection diagram for the hall gimbal. Here is the example on Literadio 3 (mode 2).
Below is the spring tension adjustment for the hall gimbal. The back cover should be disassembled before adjusting spring tension. Here is the example on Literadio 3 (mode 2).
Parts of the battery bay should be cut if the LiteRadio 2 SE is an old version. The cutting parts depend on where the throttle gimbal is installed. For the new version of LiteRadio 2 SE, it can be replaced the gimbal normally.
Note: The parts of the battery bay should be cut too if you are ready to replace gimbals for LiteRadio 2. Please refer to the old version of LiterRadio 2 SE about the cutting parts.