SEQURE Flyson10 6S Analog VTX, ELRS 2.4G Dual (AM32) with GPS, 6

6S version of the 10 inch FPV drone with GPS. PNP, requires TX (ELRS) and battery (6s with XT90 connector). Comes ready to fly with Betaflight firmware and settings. Supports also INAV and Ardupilot firmwares for waypoint flying.
Model	SQ-Flyson10-Analog-6S
Manufacturer	SEQURE
Currently on stock:	0
Price:	€ 397,61 VAT excl.

Product Description:

(1) The main controller uses an STM32H743, FC firmware Betaflight (factory default), supports INAV. The ESC employs a 32-bit MCU, with a high-performance hardware configuration of 70A 4IN1, ensuring continuous and stable operation.
(2) Paired with a high-performance FC, it supports 8S 3115 680KV or 6S 3115 900KV high-power brushless motors. Utilizing 10-inch propellers achieves optimal long-range flight efficiency.
(3) Equipped 7mm thick arms and a wide X design that reduces low-frequency noise and prevents resonance, providing 3 sets of battery strap positions to accommodate various battery sizes.
(4) The mid-plate flight controller's fully enclosed design protects the core components from interference.
(5) Features true diversity dual antennas receiver + omnidirectional signal reception.
(6) Equipped with 18cm video transmission dual antennas, maximizing long-range flight distance.
(7) Achieves a flight endurance time of up to 50 minutes for efficient long-distance travel.
(8) Equipped with a fixed XT90 power connector for easier power-up.
(9) Large-area GPS antenna for faster satellite acquisition.
(10) Supports DJI O4 AIR UNIT Pro for an HD flight experience.
(11) Rear-mounted TYPE-C programming port for convenient parameter adjustment.

Parameters of Product:

Product Name

Flyson10

Rack structure

Wide X-Link

Wheelbase

430mm

Arm thickness

7mm

Motor

6S 3115 900KV
8S 3115 680KV

Propeller

Gemfan 1050

Main Controller

STM32H743

Gyroscope

ICM-42688P

ESC

32-bit 70A 4IN1

OSD Chip

AT7456E

Black Box

16MB

Working Voltage

4-8S(14V-35V)

Receiver

PNP, ELRS 2.4G DUAL, ELRS 915M DUAL

Image Transmission

DJI O4 AIR UNIT PRO, Simulation

Antenna Of Image Transmission

5.8G circular polarized antenna, LHCP 18cm * 2

FC Firmware

Betaflight (default), supports INAV

GPS

M10-25Q

Buzzer

Yes

Recommend Battery

6S LiPo/LiHV 5000-16000mah

8S LiPo/LiHV 5000-16000mah

Video Recording (DJI O4 Pro)

Supports up to 4K 120 frames

Parameter Adjustment Port

Rear TYPE-C parameter tuning

Battery Interface

XT90 fixed type

Weight (excluding battery)

1215g

Package included:

DJI O4 Pro Version:
Flyson10 x 1
Gemfan 1050 propeller x 2
20 * 320mm ties x 2
18cm LHCP circular polarized antenna x 2
Silicon anti-slip pad for battery x 1
M5 * 20 half round head hexagonal screw x 1
M5 nut x 1
USB data cable x 1
H2 wrench x 1
H3 wrench x 1
Propeller wrench x 1
Instruction manual QR code x 1
DJI O4 Pro antenna x 2 (when choose O4 Pro version)

Analog Version:
Flyson10 x 1
Gemfan 1050 propeller x 2
20 * 320mm ties x 2
18cm RHCP circular polarized antenna x 2
Silicon anti-slip pad for battery x 1
M5 * 20 half round head hexagonal screw x 1
M5 nut x 1
USB data cable x 1
H2 wrench x 1
H3 wrench x 1
Propeller wrench x 1
Instruction manual QR code x 1