FrSky ampere sensor, 40 A

Dimension: 31.524.55mm Weight: 9,7g Measurement range: 0~40A Maximum safe current: 40A Sensor current consumption: 20mA Update Rate: ≥1Hz
Model	FR_FAS-40
Manufacturer	FrSky
Currently on stock:	0
Price:	€ 17,66 VAT excl.

Reviews

Description
Also purchased

1. Introduction

The FrSky Ampere Sensor (FAS-40) can measure Current (A), Power Consumption (mAH) and Power (W) when connected between a Battery and ESC. Current (A) and Power (W) will be displayed on the FLD-02, while Current (A) and Power Consumption (mAH) will be displayed on the DHT-U. The FAS-100 reports Power and Power Consumption without an external voltage sensor and, in addition, can be chained together to report individual cell voltages by using the FLVS-01.

FAS-40 can be connected to FrSky Sensor Hub or FrSky telemetry receiver via Digital Data-stream port (Rx) directly.

FrSky FLVS-01 (FrSky LiPo Voltage Sensor) can be plugged onto FAS-40 directly without Sensor Hub.

Using the FAS-40, without FLVS-01
Using the FAS-40, with FLVS-01
To FrSky Telemetry Receiver

2. Specifications

Model: FAS-40

Dimension: 31.5*24.5*5mm

Weight: 9,7g

Measurement range: 0~40A

Maximum safe current: 40A

Sensor current consumption: 20mA

Update Rate: ≥1Hz

3. Set Up

3.1 When using the FAS-40, without a FLVS-01:

3.1.1 Connect “Data Out” port of the FAS-40 directly to the “Volt” port on sensor hub using the provided cable.

3.1.2 Connect the “telemetry” port (Tx, Rx, GND) of the FAS-100 directly to the “digital data-stream” port of FrSky telemetry receiver (Tx, Rx, GND) using the provided cable.

3.2 When using the FAS-40, with a FLVS-01:

3.2.1Connect the FAS-100 with, at most, two FLVS-01s and connect the “Data Out” port of FAS-100 or FLVS-01 to the “Volt” port on sensor hub using the provided cable.

YES

3.2.2Connect the FAS-40 with, at most, two FLVS-01s and connect the “telemetry” port (Tx, Rx, GND) of the FAS-40 directly to the “digital data-stream” port of FrSky telemetry receiver (Tx, Rx, GND) using the provided cable.