DualSky 130 A ESC 2-12s, High Voltage, V2

Features:

● The new designed 2nd version software and hardware have many new features.
● Supports all motor types up to 210,000 rpm(2 Poles motors).
● Extremely low resistance, factory high quality MosFETs, for high current usage.
● Dualsky Governor Mode(DGM) ready.
● Adjustable cut-off, either motor stop or reduction in power.
● DLBM on/off - Dualsky Linear Brake Mode. Brake strength can be adjusted by transmitter
when switch on.
● Full protection features including: Low voltage cut-off, Over heating protection, signal loss
auto cut-off.
● Normal and Super-Soft start up modes available, for both fixed wing and helicopter setups.
● Smooth and accurate throttle control throughout the range.
● Throttle digital signal sampling, compatible with the signal frequency of 14 ms(Normal mode)
and 7 ms high-speed mode (HS Mode).
● Throttle range can be re-calibrated, so suitable for all brands of transmitter.
● Fully PC programmable when used with Dualsky USB link(#45525).
● Compatible with programming card(#45200) for easy re-programming at the field!
● Control signal  applied OPTO technology, eliminate the interference from high voltage to the
control system.

Specification：
Dimensions: 90x 55x 27mm(L x W x D)
Weight: 185g
Number of Cell: NiXX 15-36, 18-43.2V
                         LiPo 5-12S, 18.5-44.4V
Resistance(Ri)(Ohm)

: 0.0015

Max Cont.  Current: 130A (12S), 150A (6S)
Max Burst Current:  150A (12S), 180A (6S)
BEC / Dissipative Power:N/A OPTO
Programmable: Throttle + ProgCARD V2
Input Wires: 150mm, 10AWG
Output Wires: 90mm, 10AWG
Signal Wire: 300MM JR

Applications:
60cc extreme 3D planes
Up to 16kg Large Models