Y6 drone, joka on todella vahvoilla 30mm hiilikuituvarsilla ja 2,5mm hiilikuitulevyiila. Moottoriksi sopivat jopa 52mm leveät moottorit, joten tästä saa rakennettua todella tehokkaan Y-kopterin, vaikka järjestelmäkameroille tai muille raskaille hyöykuormille. Rungossa on valmiina jo virrajakolevy ja 12 V ja 5V jännitteen ulostulot, jännitemittari ja LED valot.
- Wheelbase: 600mm, Axis: 3
- 30mm diameter carbon fiber arm
- 2.5mm thick carbon fiber plate processing
- Pre-drill 45*45 flight controller install position
- Motor size: 28-52mm
- Landing skid diameter: 20mm
- Weight: 1159g
Main Board:
- 6 ESC Distribution board, XT60 Connector
- 6050 mold for 32 BIT Brushless GIMBAL
- LED 1W
- LED module socket for ESC and Motor
- GoPro AV signal input
- 12V 3A BEC output & AV signal input (1-way socket provides AVOUT /12V/GND for FPV, other three only provides 12V output function)
- 5V 3A BEC output & AV signal input (1-way socket provides AVOUT /5V/GND， for FPV, other three only provides 5V output function)
- Battery Voltage Tester
Suitable electronics:
6 x DualSky XM5015TE-4, 765W (for high lift setup) - DualSky XM4010TE-7, 340W (with GoPro etc.)
4 x EMAX Multi copter motor 4114-340kv CCW (budget, 6s), 2 x EMAX Multi copter motor 4114-340kv CW
6 x 40-60A ESC