Ylös

 
Jaa Facebookissa Jaa Twitterissä

Edellinen
Seuraava
Tuote 16 / 17
Tämä tuote on lisätty keskiviikkona 05 heinäkuuta, 2017.

RocHobby MXS V2, 1100mm EPO, PNP

  • Wingspan: 1100mmmm
  • length: 1080mm
  • Motor 3536 / KV1250
  • Flying weight: 1100g

Uusi  1100mm MXS 3D taitolentokone. Suunniteltu 3D lennon harjoitteluun ja kehittyneille piloteille. Suunniteltu ensisijaisesti 3D lentoon ja siiven vortex generaattorit pitävät virtaukset kiinni siivessä tiukoissakin 3D liikkeissä.

Malli MXS_1100_v2_pnp
Merkki FMS
Varastossa: 0
Hinta:   €  176,61
Ilman ALV
Arviot

Introducing the all new 1100mm MXS 3D aerobatic plane from FMS Models. Designed for the Intermediate to advanced 3D pilot & built specifically for 3D Flight, the MSX is sure to please even the most capable of 3D pilots.

Built from super strong EPO foam, the receiver ready MXS is ready glueless to assemble requiring only 10 screws to complete. Add your 4 channel receiver and 3s 2200mAh battery and you are ready to fly. Strong tube spars in the wing and tail create a super rigid structure that can withstand even the harshest 3D punishment. The powerful 35-36 1250kv Outrunner, 40amp ESC, & 4 Metal Gear Digital servos are pre-installed and ready to fly out of the box. The preinstalled precision ball links and rods expedite assembly time and provide precise control of nearly any aerobatic maneuver desired. Extra long, servo arms are designed in an over-center position from the control surface horns to provide massive amounts of control surface throw for low speed Harrier & hovering flight. Wing tip Side Force Generators further enhance the low speed performance by directing the airflow over the ailerons for more positive control. Tough but lightweight aluminum landing gear and large 2 1/2” wheels make grass takeoffs and landings a breeze. A large, magnetic hatch makes changing the battery quick and easy!

Painted in bright yellow and black, The new MXS is sure to get attention at the flying field… Easy to assemble, built tough & 3D ready…. Look no further than the New MXS from FMS Models!

 

Features

1. Easy to assemble Need glue for wing tip Vortex generators
2. New hollow wing design for reduced weight and rigidity
3. Wing tip Side Force Generators for superior Knife Edge and slow maneuvering
4. Super strong laminated control surface hinges
5. Powerful 35-36 1250kv outrunner motor
6. 40amp ESC
7. 4 digital metal gear servos
8. Wings and tail remove for transport, however 1100mm size makes transport easy
9. Ultra visible yellow & black high contrast paint scheme

Wingspan 1100mm /43.3in
Overall Length 1080mm /42.5in
Flying Weight 1100g /38.8oz
Motor Size Brushless 3536-KV1250
ESC 40A
Servo 9g digital metal gear x 4
Radio 4 Channel
CG (center of gravity) 85-90mm (From Leading Edge)
Prop Size 11*5.5, 2 blade propeller
Recommended Battery Li-Po 11.1V 2200mAh 25C
Aileron Yes
Elevator Yes
Rudder Yes
Flaps No
Retracts No
Approx. Flying Duration 5min
Minimum Age Recommendation 14+
Experience Level Intermediate
Recommended Environment Outdoor
Assembly Time 45 minutes
Is Assembly Required Yes
Material Durable EPO
Package Options PNP
Requires PNP Requires Radio System, Battery and Charger