Ylös

 
Jaa Facebookissa Jaa Twitterissä

Edellinen
Seuraava
Tuote 42 / 53
Tämä tuote on lisätty torstaina 16 elokuuta, 2018.

Radiolink R12DSM 2.4G 12 channels SBUS receiver. DSSS/FHSS

Radiolink R12DSM, 2.4G 12-kanavainen SBUS / PPM micro vastaanotin, paino vain 2,5g. DSSS and FHSS spread spectrum working synchronously, use for Radiolink transmitters AT9, AT9S and AT10. SBUS, PPM and PWM signal possible working at the same time.

Malli RL_R12DSM
Merkki Radiolink
Varastossa: 1
Hinta:   €  20,97
Ilman ALV
Arviot

Radiolink R12DSM 2.4G 12CH receiver, DSSS and FHSS hybrid dual spread spectrum, 2.5 gram weight, SBUS and PPM signal support, use for Radiolink transmitters AT9, AT9S, AT10 and AT10II, is the best choice for racing drone.

Description:
Item number: R12DSM

Channels: 12 channels

Working voltage: 4.8-6V

Working current: 40-180mA (input voltage: 5V)

Size: 30*15 MM

Weight: 2.5g
4096 section precision, 0.5us per section, servo anti-shake rudder.
Control distance: about 1100 meters ground and 4000 meters air, actually control distance depends on the environment.

Features:

* Only 1 gram of weight.

* Radiolink R12DSM, 2.4G 12CH receiver.

* DSSS and FHSS spread spectrum working synchronousl.

* SBUS and PPM signal support, use for Radiolink transmitters AT9,AT9S,AT10 and AT10II, is the best choice for racing drone.

 

Two signal working mode:

Blue/purple LED, SBUS signal, 12 channels totally.

Red LED always, PPM signal, 12 channels totally.
 

SBUS and PPM signal change:

Short press the ID SET switch two times within 1 second, the signal is changed from SBUS to PPM. The red LED indicates the PPM and blue/purple indicates SBUS.
 

How to bind with transmitter:

1. Place the transmitter and the receiver close to each other within 1 meters.

2. Turn on the transmitter, then power on the R12DSM.

3. There is a black button on the R12DSM, press the binding button twice in two seconds and release, receiver light start blinking, after about 8 times blinking, match code success when receiver signal LED always on!