Sensors for eLogger
Displaying 1 to 14 (of 14 products)
Result Pages: 1
-
Altitude MicrosensorTM V3
new Airspeed and Altitude MicroSensors have two modes: they work standalone with no additional equipment required, as well revving up your eLogger and PowerPanel LCD for full data logging. These precision instruments use pressure differential to measure Airspeed or Altitude....Model : ALTIMETER-V3 Brand : EagleTree Stock : 1 Price: € 24,19 -
topsellers
Altitude MicrosensorTM V4
new Airspeed and Altitude MicroSensors have two modes: they work standalone with no additional equipment required, as well revving up your eLogger and PowerPanel LCD for full data logging. These precision instruments use pressure differential to measure Airspeed or Altitude....Model : ALTIMETER-V4 Brand : EagleTree Stock : 0 Price: € 28,23 -
Battery Backup Harness
Lets you power your eLogger from a separate backup battery (4.8v - 6v) if your primary pack dips below about 4.5 v. Note that the eLogger will correctly log the voltage of your primary pack even when the Backup Harness is used....Model : CAB-BAT-BACK Brand : EagleTree Stock : 1 Price: € 4,19
-
topsellers
Custom Y Cable for Throttle Logging
Monitor Throttle or other servo movements with your eLogger V3!...Model : CAB-Y-1 Brand : EagleTree Stock : 8 Price: € 6,10 -
Free Shipping, FI
GFORCE-HIGH - 3-Axis G-Force Microsensor
The high G sensor measures up to 40g (at least 38g) in the X and Y axes, and up to 8g in the Z axis....Model : GFORCE-HIGH Brand : EagleTree Stock : 1 Price: € 50,73 -
GFORCE-LOW - 3-Axis G-Force Microsensor
The low G sensor measures up to 8g (at least 7g) in each of the 3 axes....Model : GFORCE-LOW Brand : EagleTree Stock : 0 Price: € 24,11
-
Male RCA to Servo Connector Adaptor Cable
Useful if your video equipment uses RCA plugs. Two are needed if both your camera and video transmitter use RCA. Also can be used for audio if your video transmitter's audio in uses RCA....Model : CAB-RCA-SRV Brand : EagleTree Stock : 2 Price: € 8,02 -
Memory Expander for eLogger V1&V2
(NOT compatible with eLogger V3) Increases your eLogger's onboard logging time by 5x! Daisy-chains with all other eLogger MicroSensors!...Model : MPR-MEM-EXP Brand : EagleTree Stock : 0 Price: € 18,86 -
Motor (Loop) Temperature sensor
Loop-around temperature sensor measures temp up to 420 degrees F. Great for looping around motors. NEW: The eLogger V3 supports up to two Hall Effects or Brushless RPM sensors! Up to three temperature sensors can be connected to the eLogger V3 simultaneously (two simultaneously for the V1/V2)....Model : TEMP-LOOP Brand : EagleTree Stock : 0 Price: € 8,05
-
Multi-Expander for eLogger V1&V2
(NOT compatible with eLogger V3) Expands your eLogger to support Brushless RPM, Throttle movement recording, and simultaneous recording of two temperatures.Includes integrated Brushless RPM sensor and Y cable for Throttle monitoring. Temperature sensors sold separately....Model : MPR-MULTI-EX Brand : EagleTree Stock : 0 Price: € 15,61 -
NEW: Spektrum/JR (TM) Interface Cable
Now use your eLogger V3 to see Spektrum/ JR Rx holds/failsafes, lost frames, and antenna fades (up to 4 antennas) on your PowerPanel, or logged for later review! Connects between your Spektrum "FlightLog" data port and the eLogger V3's GPS port. Use a servo Y cable to use your FlightLog display s...Model : CAB-SPEK Brand : EagleTree Stock : 5 Price: € 3,17 -
topsellers
Optical RPM sensor
Measures your RPM without need for installing magnets. Note: This version is for the eLogger V3 and the V2, which we have been selling since early 2006. The eLogger V2 has the large white letters "V2" (or "U2") on the bottom of the circuit board, near the RPM/Temp pins....Model : OPT-RPM Brand : EagleTree Stock : -1 Price: € 11,06
-
RPM/Temperature Extension wire
12” (30 cm) 3 pin extension cable for our RPM and Temperature sensors...Model : CAB-RPM-EXT Brand : EagleTree Stock : 3 Price: € 3,74 -
rushless RPM Sensor V2
Tiny sensor measures RPM by simply connecting a wire from one of your brushless electric motor leads to the sensor. This connection is just a tap (not inline) which simplifies installation....Model : RPM-BRS-V2 Brand : EagleTree Stock : 0 Price: € 12,20
-
Price: € 24,19
Altitude MicrosensorTM V3
new Airspeed and Altitude MicroSensors have two modes: they work standalone with no additional equipment required, as well revving up your eLogger and PowerPanel LCD for full data logging. These precision instruments use pressure differential to measure Airspeed or Altitude....Model : ALTIMETER-V3 Brand : EagleTree Stock : 1 -
topsellersPrice: € 28,23
Altitude MicrosensorTM V4
new Airspeed and Altitude MicroSensors have two modes: they work standalone with no additional equipment required, as well revving up your eLogger and PowerPanel LCD for full data logging. These precision instruments use pressure differential to measure Airspeed or Altitude....Model : ALTIMETER-V4 Brand : EagleTree Stock : 0 -
Price: € 4,19
Battery Backup Harness
Lets you power your eLogger from a separate backup battery (4.8v - 6v) if your primary pack dips below about 4.5 v. Note that the eLogger will correctly log the voltage of your primary pack even when the Backup Harness is used....Model : CAB-BAT-BACK Brand : EagleTree Stock : 1
-
topsellersPrice: € 6,10
Custom Y Cable for Throttle Logging
Monitor Throttle or other servo movements with your eLogger V3!...Model : CAB-Y-1 Brand : EagleTree Stock : 8 -
Free Shipping, FIPrice: € 50,73
GFORCE-HIGH - 3-Axis G-Force Microsensor
The high G sensor measures up to 40g (at least 38g) in the X and Y axes, and up to 8g in the Z axis....Model : GFORCE-HIGH Brand : EagleTree Stock : 1 -
Price: € 24,11
GFORCE-LOW - 3-Axis G-Force Microsensor
The low G sensor measures up to 8g (at least 7g) in each of the 3 axes....Model : GFORCE-LOW Brand : EagleTree Stock : 0
-
Price: € 8,02
Male RCA to Servo Connector Adaptor Cable
Useful if your video equipment uses RCA plugs. Two are needed if both your camera and video transmitter use RCA. Also can be used for audio if your video transmitter's audio in uses RCA....Model : CAB-RCA-SRV Brand : EagleTree Stock : 2 -
Price: € 18,86
Memory Expander for eLogger V1&V2
(NOT compatible with eLogger V3) Increases your eLogger's onboard logging time by 5x! Daisy-chains with all other eLogger MicroSensors!...Model : MPR-MEM-EXP Brand : EagleTree Stock : 0 -
Price: € 8,05
Motor (Loop) Temperature sensor
Loop-around temperature sensor measures temp up to 420 degrees F. Great for looping around motors. NEW: The eLogger V3 supports up to two Hall Effects or Brushless RPM sensors! Up to three temperature sensors can be connected to the eLogger V3 simultaneously (two simultaneously for the V1/V2)....Model : TEMP-LOOP Brand : EagleTree Stock : 0
-
Price: € 15,61
Multi-Expander for eLogger V1&V2
(NOT compatible with eLogger V3) Expands your eLogger to support Brushless RPM, Throttle movement recording, and simultaneous recording of two temperatures.Includes integrated Brushless RPM sensor and Y cable for Throttle monitoring. Temperature sensors sold separately....Model : MPR-MULTI-EX Brand : EagleTree Stock : 0 -
Price: € 3,17
NEW: Spektrum/JR (TM) Interface Cable
Now use your eLogger V3 to see Spektrum/ JR Rx holds/failsafes, lost frames, and antenna fades (up to 4 antennas) on your PowerPanel, or logged for later review! Connects between your Spektrum "FlightLog" data port and the eLogger V3's GPS port. Use a servo Y cable to use your FlightLog display s...Model : CAB-SPEK Brand : EagleTree Stock : 5 -
topsellersPrice: € 11,06
Optical RPM sensor
Measures your RPM without need for installing magnets. Note: This version is for the eLogger V3 and the V2, which we have been selling since early 2006. The eLogger V2 has the large white letters "V2" (or "U2") on the bottom of the circuit board, near the RPM/Temp pins....Model : OPT-RPM Brand : EagleTree Stock : -1
-
Price: € 3,74
RPM/Temperature Extension wire
12” (30 cm) 3 pin extension cable for our RPM and Temperature sensors...Model : CAB-RPM-EXT Brand : EagleTree Stock : 3 -
Price: € 12,20
rushless RPM Sensor V2
Tiny sensor measures RPM by simply connecting a wire from one of your brushless electric motor leads to the sensor. This connection is just a tap (not inline) which simplifies installation....Model : RPM-BRS-V2 Brand : EagleTree Stock : 0
Displaying 1 to 14 (of 14 products)
Result Pages: 1