Top

  • new
 
Share on Facebook Share on Twitter

Previous
Next
Product 39 of 39
This product was added to our catalog on Tuesday 09 January, 2018.

FrSky ampere sensor, 100 A, ultra plug

Dimension: 38*30*10mm Weight: 24g Measurement range: 0~100A Maximum safe current: 100A Sensor current consumption: 33mA Update Rate: ≥1Hz. With ultra plug / T-connector connectors

Model FR_FAS-100Ultraplug
Manufacturer FrSky
Currently on stock: 3
Price:   $  32.23
VAT excl.
Reviews

1.  Introduction

The FrSky Ampere Sensor (FAS-100) can measure Current (A), Power Consumption (mAH) and Power (W) when connected between a Battery and ESC. Current (A) and Power (W) will be displayed on the FLD-02, while Current (A) and Power Consumption (mAH) will be displayed on the DHT-U. The FAS-100 reports Power and Power Consumption without an external voltage sensor and, in addition, can be chained together to report individual cell voltages by using the FLVS-01.

 

2.  Specifications

Model: FAS-100

Dimension: 38*30*10mm

Weight: 24g

Measurement range: 0~100A

Maximum safe current: 100A

Sensor current consumption: 33mA

Update Rate: ≥1Hz

 3.  Set Up

3.1 When using the FAS-100, without a FLVS-01:

3.1.1Connect “Data Out” port of the FAS-100 directly to the “Volt” port on sensor hub using the provided cable.

3.1.2Connect the “telemetry” port (Tx, Rx, GND) of the FAS-100 directly to the “digital data-stream” port of FrSky telemetry receiver (Tx, Rx, GND) using the provided cable.

3.2 When using the FAS-100, with a FLVS-01:

3.2.1Connect the FAS-100 with, at most, two FLVS-01s and connect the “Data Out” port of FAS-100 or FLVS-01 to the “Volt” port on sensor hub using the provided cable.

                      YES                    

 

                      YES                    

          NO

3.2.2Connect the FAS-100 with, at most, two FLVS-01s and connect the “telemetry” port (Tx, Rx, GND) of the FAS-100 directly to the “digital data-stream” port of FrSky telemetry receiver (Tx, Rx, GND) using the provided cable.

3.3 Connect Battery and ESC to the corresponding port of “BAT” and “ESC”, a flashing RED LED indicates normal operation.

Note:When FAS-100 is used with a sensor hub, please make sure the sensor hub is V2.0.

Driver for XP/ Win7 Vista: http://www.frsky-rc.com/download.asp?id=22

FSH-01 Upgrade ROM_V2.0:http://www.frsky-rc.com/download.asp?id=22

How-to_sensor hub upgrade: http://www.frsky-rc.com/download.asp?id=22