Ylös

  • Uutuus
  • Uutuus
  • Uutuus
 
Jaa Facebookissa Jaa Twitterissä

Edellinen
Seuraava
Tuote 27 / 28
Tämä tuote on lisätty torstaina 30 heinäkuuta, 2020.

BETAFPV BT2.0 1S Charger Board, 220V muuntajalla EU

Näppärä laturi BT2.0 1s akuille. Mukana tulee virtalähde ja ulkona voit käyttää 3s tai 4s LiPo akkua virtalähteenä. Lataa jopa kuutta 1s akkua samanaikasesti, jokaiselle oma latauspiiri, eli voit lisätä ja poistaa akkuja latauksen aikana. Lataa 400mA virralla.

Malli 00313684_2
Merkki BetaFPV
Varastossa: 5
Hinta:   £ 20.40
Ilman ALV
Arviot

Compact, versatile and powerful, the battery chargers board is among the most popular pilots' common tools. This charger board is customized for BT2.0 connector battery, while it is safely and easily charging packs.

Not sure if it's worth to switch BT2.0? Check more from Joshua Bardwell'video- Proof that BT2.0 connector is better than PH 2.0

 

Bullet Point

  • Allow charging 6pcs BT2.0 Connector batteries at the same time, Individual charging per ports, not parallel
  • You could also use XT60 adapter or 3s/4s battery(XT60 Input) as supply power so you can continuously charge
  • Turns itself off when supply battery reaches safe low-voltage. 2 channels BEC for supply current
  • LED lights indicate when each battery is done charging

Note: If you plug battery with XT60 connector, please switch to corresponding Input voltage button. 3S battery-- 3S button, 4S battery-- 4S button. If you do not switch match button, it will unable to be charged. The power adapter can choose any Input voltage button.

Charger Board Specification

  • Weight: 36.86g
  • ​Dimensions: 75x42x22mm
  • ​Input: 3s - 4s Selectable
  • Cutoff Voltage: 10.8v (3s), 14.4v (4s) 
  • Output: Fixed at approx 400 milliamps
  • 4.35v cell charging cutoff for Lipo battery (+- 0.5% margin of error)
  • Optional AC Wall Adapter

Wall AC/DC Adapter (Included)

If you don't have any XT60 batteries, AC/DC XT60 wall power adapter will be your best choice.