Wingspan: 44”（1120mm）
Wing Area: 290 sq. in.
Ready-to-fly weight: 20-23 oz.
Length: 30”（760mm）

Suggested accessories:

DualSky XM2830CA-10T 150/200 W - DualSky XM3530CA-12T 160/260 W

DualSky 25 A ESC

1300 mAh 25C 3s1p 11,1 v - 2200 mAh 20C 3s1p 11,1 v

4 x 10g microservo

The Ryan STA represents one of the sleekest vintage aviation designs of the Golden Era.  The Ryan Company of San Diego owns the history of building one of the most recognizable aviation aircraft in history, The Spirit of St. Louis.  The Ryan STA sported a 125hp Menasco C-4 engine and sold for $4,685.  Its sleek appearance is captured with its large rounded cowl and wheel pants.  Some may not realize the Ryan STA was an aerobatic champion and a low-wing pioneer, all in one.

• Construction: Precision laser-cut balsa & plywood construction.
• Wings: Wing & stabilizer are built-up one piece designs.
• Wing Spars: Traditional hardwood spars.
• Incidence: Factory pre-set.
• Control Surfaces: Conventional sport size control surface area.
• Covering: Factory applied Oracover covering. Vinyl graphics also included.
• Cowl: Precision color matched pre-painted ABS plastic.
• Wheel Pants: Precision color matched pre-painted ABS plastic.
• Canopy / Hatch: Pre-formed & pre-painted ABS plastic
• Landing Gear: Two piece pre-formed wire gear, installs in the wing.
• Servos: One per Aileron / One for Elevator / One for Rudder. (4 servos total)
• Hinge Slots: Factory Pre-slotted.
• Building Time: 4-6 hours.