Wingspan: 77" / 195cm
Wing Area: 1050 sq. in. / 69 dm3
Ready-to-fly weight: 9.5-10.5 lbs. / 4.5 - 5 kg
Length: 75" / 190 cm
Power: 140-180 Glow

2-meter "Artistic Freestyle" Pattern Plane ARF, the "Rock-n-Roll".  So, what is Artistic Freestyle?  Artistic Freestyle, in the pattern community, is very similar to IMAC 3D Aircraft.   The Rock-n-Roll construction is based on the success of the Icepoint and our 29% Giles 202.  The Rock-n-Roll features two-piece wings and stabs, a traditional firewall structure to accept the popular Hyde engine mount or equivalent, a molded one-piece canopy / hatch assembly, and a pre-mounted two-piece fiberglass cowl. 

Features:

• Construction:  Precision laser-cut balsa & plywood construction.
• Wings:  Wing & stabilizer are built-up 2-piece designs.  Removable stabilizers.
• Wing Spars:  Carbon fiber wing and stabilizer tubes / joiners.
• Incidence:  Factory pre-set.  Can be made to be adjustable.
• Control Surfaces:  3D Control surface area, double beveled.
• Covering:  Factory applied Oracover covering.  Vinyl graphics also included.
• Cowl:  Precision color matched pre-painted fiberglass - Two Piece.
• Wheel Pants:  Precision color matched pre-painted fiberglass.
• Canopy / Hatch:  Pre-formed & pre-painted.
• Landing Gear:  Carbon composite one-piece gear.  Pre-painted.  .
• Servos:  One per Aileron / One per Elevator / One Pull-Pull Rudder / One Throttle.
• Hinge Slots:  Pre-drilled for "Robart" style hinge points.
• Tuned Pipe:  Pre-built tuned pipe / muffler tunnel.
• Building Time:  9 - 12 hours.

Includes:
Pre-built and covered wings, tail assemblies, and fuselage.  All necessary hardware including pushrods, landing gear, wheels, servo tray, Carbon Fiber Wing and Stab tubes, and a photo illustrated instruction manual.

Requires:

• Engine:  140 - 180 Glow engine or 2000+ W electric motor (+ suitable mount)
• Muffler:  Tuned Pipes are suggested; however a stock muffler could be used.
• Radio:  Minimum (4) channel radio.  (Computer radio recommended)
• Servos:  (5) High Torque - 90 oz. in. of torque - minimum.  We recommend the use of metal gear servos.  A higher torque servo may be desired for the Pull / Pull system.  (1) standard servo for the engine. 
• Spinner:  3" (76mm)
• Misc. Items:  Glow Plug, foam Padding, Fuel tubing, fuel filter, propeller, building and field equipment.