On/Off Control from the Transmitter REVERSIBLE

To take full advantage of any extra 2-position control switch on the transmitter, plug an electronic remote power switch into the corresponding receiver channel to decode the position of the switch on the transmitter.  Power to the lights is supplied via the RX and switched through the TX toggle switch.

AUTO-OFF FEATURE: All power is switched off any time the electronic switch receives a bad signal or the TX is turned off. This feature can be disabled.

Switch turns on at mid-stick (50% throw).  Non-Adjustable.

MAX LOAD: 1.2A

INCLUDES
-ELECTRONIC REMOTE POWER SWITCH
-14" WIRE EXTENSION