|
|
VarioPROP 16D, Giant/Big Scale props |
 |
for model airplanes from
ca. 2.800 to 15.000 g weight
shaft diameter from
6,0 mm to 12,0 mm
adjustable upward gradient from
6,0'' (152,4 mm) to ca. 25'' (635 mm)
propeller diameter from
16,2'' (412 mm) to 22,6'' (574 mm)
Hub can be used directly on M12 threaded shaft. For smaller shafts an adapter is required. |
 |
|
|
 |
| Displaying 1 to 14 (of 14 products) |
Result Pages: 1 |
| |
Product Name+ |
Price |
 |
2-blade hub 12,0mm
Suitable for 12mm threaded shaft or with an adapter to smaller diameter axles.
Variable pitch from 6,0 to 25 inches |
64,00€
Stock: 1
|
 |
3-blade hub 12,0mm
Suitable for 12mm threaded shaft or with an adapter to smaller diameter axles.
Variable pitch from 6,0 to 25 inches |
73,00€
Stock: 1
|
 |
4-blade hub 12,0mm
Suitable for 12mm threaded shaft or with an adapter to smaller diameter axles.
Variable pitch from 6,0 to 25 inches |
76,00€
Stock: 0
|
 |
5-blade hub 12,0mm
Suitable for 12mm threaded shaft or with an adapter to smaller diameter axles.
Variable pitch from 6,0 to 25 inches |
88,00€
Stock: 0
|
 |
Propellerblade 16,2" D
Max. RPM 11.000
Weight: 31.1g
righthanded (normal) |
5,50€
Stock: 5
|
 |
Propellerblade 17,2" D
Max. RPM 9.500
Weight: 36.6g
righthanded (normal) |
6,60€
Stock: 2
|
 |
Propellerblade 18,2" D
Max. RPM 7.500
Weight: 37.3g
righthanded (normal) |
9,00€
Stock: 5
|
 |
Propellerblade 18,6" HS
Max. RPM 7.000
Weight: 37.9g
righthanded (normal) |
9,80€
Stock: 5
|
 |
Propellerblade 19,9" SG
Max. RPM 7.800
Weight: 38.7g
righthanded (normal) |
10,80€
Stock: 5
|
 |
Spinner-Nut-16D, 3/8-24UNF
If your motor has a threaded shaft smaller than M12, which is shorter than 33 mm, you would need this Spinner-Nut. The cylindrical part goes 8 mm in the 12 mm hole of a hub. There is also a thread M4 for fixing a spinner cap. |
9,70€
Stock: 1
|
|
Spinner-Nut-16D, 5/16-24UNF
If your motor has a threaded shaft smaller than M12, which is shorter than 33 mm, you would need this Spinner-Nut. The cylindrical part goes 8 mm in the 12 mm hole of a hub. There is also a thread M4 for fixing a spinner cap. |
9,70€
Stock: 0
|
|
Spinner-Nut-16D, M8x1
If your motor has a threaded shaft smaller than M12, which is shorter than 33 mm, you would need this Spinner-Nut. The cylindrical part goes 8 mm in the 12 mm hole of a hub. There is also a thread M4 for fixing a spinner cap. |
9,70€
Stock: 0
|
 |
Steel-Collet Chuck (lg), for 6,0mm axle
For fitting 16D hub on a 6,0mm axle. |
16,00€
Stock: 1
|
|
Steel-Collet Chuck (lg), for 8,0mm axle
For fitting 16D hub on a 8,0mm axle. |
17,00€
Stock: 0
|
| Displaying 1 to 14 (of 14 products) |
Result Pages: 1 |
|
|
|
