Package contents:

• 1 x Telemetry module
• 1 x DR8-II, 8-channel telemetry receiver
• 1 x programming cable (COM port). USB cable can be bought seperatetly
• 1 x CD, with english manuals and software for setting up the telemetry and updating the firmware

FrSky normal receivers work with the telemetry module in one way mode (without telemetry).

The Two-way Radio System developed by FrSky provides an additional return link that can be used for monitoring the models battery voltage, temperature, location, speed and so on.

Model: DJT
Compatible with the following transmitters:
JR: 347/388/783/U8/PCM10/PCM10S/PCM10SX/
PCM10IIS/8103/J9303/MX-22/MX-24S/PX/9XII.
FlySky 9ch

Advanced Continuous Channel Shifting Technology (ACCST is our advanced technology. It shifts hundreds of times per second and there is no signal conflicts and interruptions), robust frequency agility.

• Easy to bind and very fast link-up
• Excellent reboot times
• True two antennas diversity
• All channels are very effective and easy to set failsafe.
• Responsive and rock-solid in performance.
• Very Smooth servo movement
• Extended operating range (1.5km-2.5km)
• Firmware can be updated (PC software included).

Two Way communication
a) Two way communication between receiver and transmitter
b) Receiver is able to accept 2 analog inputs, which can be used to monitor battery voltage, temperature sensor, etc., and transfer them to transmitter. Users can set the Alarm Level of these analog voltages, when exceed or below these levers, sound alarm is issued.
c) Receiver is able to accept serial data streams from simple 3-wire RS232 port, such information as GPS, altitude, and user developed data can be transferred to Tx without error, and sent at the RS232 port on the Tx.

Receiver specifications:

• Model: D8R-II
• Weight: 16.2g
• Dimension: 54*27*17mm
• Operating Voltage Range: 4.0V-7.2V
• Operating Current: 100mA
• Specified Range: 1.5km (Ground Range)
• Resolution: 11bit (3072)
• Latency: 22ms
• Number of Channels: 8CH
• Analog voltage: 0~3.3V

Transmitter module specifications:

• Operating Voltage Range: 6.0V-13.0V
• Operating Current: 50mA
• Output Power: 60mW
• Resolution: 3072 (11 bit)
• Dimensions: 63.9X48.5X36.5mm (V8JT); 58.5x37.5x22mm (V8FT)