Powerful over 500W motor, with 1:1 weight to thrust ratio. Speed over 140km/h. 

Powerful Electric Ducted Fan Jet
Perfect aerobatic maneuvers, such as rolls, loops, and the "Cobra maneuvers";
Stable inverted flight
Controllable nose landing gear, easy to fly
Die-cast design easy to replace the spare parts

Specifications:

• Wingspan: 693mm (27")
• Length: 1000mm (40")
• Flying Weight: 900g
• Wing area: 15dm2
• Wing Load: 60g/dm2
• Radio System: 4Ch Tx and 6 Ch Rx ,
• 5 x 9 gram servos
• 70MM Ducted fan
• Brushless Powered: Powerful 2836 inner runner brushless motor and 45A ESC
• 5A UBEC
• Battery: 4s 2200Mah, 18C 14.8V
  

This jet has plenty of power for rolls, loops, and inverted flight. Fitted with a steerable nose gear. Take-offs are short and landings are slow and easy. All electronics come pre-installed, no soldering required.

The assembly takes about an hour. You connect the wings, tail and nose to the fuselage with epoxy glue, screw the fixed main landing gear to the fuselage, install the servo horns to the ailerons and elevator, and connect the control linkages and receiver. Kit comes with illustrated instruction booklet.

Recommended for intermediate to advanced pilots.

Flight times of up to 6 minutes can be expected with stock battery.

Controls are Ailerons, Elevator, Front landing gear and Throttle.