|
Can be programment with EMAX programming card
Budget ESC 18Amp
|
Item
|
Continuous Current
|
Burst current(10S)
|
Li-xx Battery(cell)
|
Dimension (mm)L*W*H
|
Weight(g) wires Included
|
BEC(Linear)
|
Programmable
|
|
Budget 10A
|
10A
|
15A
|
1-3
|
|
|
1A/5V
|
YES
|
|
Budget 18A
|
18A
|
23A
|
2-3
|
55*30*15
|
24
|
2A/5V
|
YES
|
|
Budget 30A
|
30A
|
40A
|
2-4
|
60*30*15
|
24
|
2A/5V
|
YES
|
|
Budget 50A
|
50A
|
65A
|
2-5
|
70*35*20
|
38
|
3A/5V
|
YES
|
1. Equipped with high-speed, small-sized, multifunctional MCU
2. Low-voltage protection, over-heat protection, signal loss protection, safe power on protection, and self-check functions.
3. Excellent soft startup performance, 4-second very soft start mode, expecially suits helicopters.
4. Excellent low-speed performance.
5. Max speed: 240,000 rpm for 2-pole, 80,000 rpm for 6-pole, 40,000 rpm for 12-pole.
6. Separate power supply for MCU and BEC, enhancing the ESC’s ability of eliminating magnetic interference.
7. Parameters of the ESC can be set via program card or transmitter.
8. Throttle range can be set to be compatible with different receivers.
9. Three throttle linear curve options.
10. Motor reverse rotation can be set by using transmitter.
11. Equipped with built-in linear BEC or switch BEC.
Several programming options can be set with your transmitter or a program card, but no programming is needed for most applications. Here is a list of the programming options:
1. Motor brake on or off. Comes pre-set with the brake turned off, so the propeller will spin freely when the plane is gliding (transmitter throttle off).
2. Selection of battery type: Lipo or NiMh/NiCD. Comes pre-set for use with Lipo batteries, and it auto-detects the number of Lipo cells.
3. Low voltage protection: low (2.6v per cell), medium (2.85v per cell) and high (3.1v per cell). Comes pre-set for medium Lipo battery protection.
4. Type of motor cut-off: sudden or gradual. Comes pre-set for gradual motor shutdown.
5. Start-up mode: fast, soft or very soft. Comes pre-set for fast motor startup.
6. Throttle curve: curve1, curve2 and curve3. Comes pre-set for curve1
7. Motor timing: low, medium or high. Comes pre-set for medium timing (outrunner motors with 6 poles or more)
8. Motor rotation: normal or reverse Comes pre-set for normal rotation
|
