|
The VR-3 is a switch-mode DC regulator separated from ESC, it will take high-voltage (5.5V-23V) power from your battery pack and convert it to a consistent safe voltage for your receiver, gyro and servos.
Green led shows when power ON, switching frequency of more than 300KHz, reverse polarity protection.
When ESC has BEC function, remove the red wire from ESC to Receiver connector.
- Input: 5.5V-23V (2-5s lithium battery pack, 5-15cells NiMh / NiCd battery pack)
- Output: 5V/3A or 6V/3A, MAX. 5A(10% Duty)
- Ripple: <50mVp-p (@2A/12V)
- Size: 43 x 19 x 8mm (length x width x high)
- Max. effiency: 92%
- idle power consumption: <10ma
- Weight: 10g (cables and ferrite ring included)
|
