Specifications:

Operating voltage: DC 11~18 volts
Idling current: approx 100mA
Charge/discharge power: max. 200/50W
NiCd/MH cell count: 1~32 cells
Li-ion/polymer/Fe (A123): 1~12 series
Pb: 2~12 or 24V
Charge current: 0.1 to 9.9A
Discharge current: 0.1 to 9.9A
No. of cycles: 1 to 5 times
Battery data memories: up to 10 data
OUTPUT-2: 1~8 cells NiCd/MH (0.1~2.0A)
External load: R: 1 or 2 Ohms
Motor Driver: max. 20A load
Weight: 1000g
Dimension: 160x148x60 mm

Main features:
- Dual output
OUTPUT-2 charges 1 to 8 cells of Ni-Cd/MH using Delta-peak voltage termination
OUTPUT-2 charge current is up to 2.0A

High-power and high-performance circuit

   902 employs the circuit that has maximum output power of 200W. As a result it can charge or discharge up to 32 cells of NiCd/NiMH and 12 series of Lithium batteries with maximum current of 9.9A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of the circuit or the operating programs. If you need more power to discharge the battery of high voltage with high current you can link an external discharge module (ELD200) that is sold separately to the unit.

-  Optimized operating software

   When charging or discharging, 902 has an 'AUTO' function that set the feeding current or the cell count of Lithium battery automatically. Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communicates for every possible error. So it introduces a maximum safety. These can be set at users option.

- 'OUTPUT-2'

   The 'OUTPUT-2' can charge NiCd or NiMH battery up to 6 cells with 'OUTPUT-1' simultaneously. It employs the delta-peak voltage detection method not the trickle charge and is independently operated from 'OUTPUT-1'. Do not try to charge Lithium battery at OUTPUT-2.

- PWM Motor driver

   You can easily break-in or test the motor at 'OUTPUT-1' with a variable feeding voltage, and running time. And also you can check the output power and the consumption of electric current of the motor at real time.

- Lithium 'Fast'/'Storage' mode charge

   You can charge Lithium batteries for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage mode controls the final voltage of battery to be suit for long time storage.

-  Monitoring the voltage of individual cell

    Unbalance of the voltage of each cell can occur in the Lithium battery pack because of consecutive charge and discharge. Using 'Lithium balancer(PB5 or PB6)', the charger monitors the voltage of each cell and controls the charge and discharge current to equalize the voltage. For this process the charger communicates with the external balancer thru the temperature sensor port.

-  Battery data store/load

    For users convenience it can store maximum 10 data of battery. You can establish the data contains program setting of the battery to be charged or discharged continually. These data can be called out at any time you need and executed without program setting.

-  Cyclic charging/discharging

    Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.

-  PC based analysis using USB communication

    For technical expert, 902 offers PC based software can analysis the characteristic of the battery using USB port. It shows a graph of voltage, current, capacity and temperature curves. 

- Back-light LCD screen

  You can adjust the brightness of LCD display 

- Robust outer aluminum case
  High-quality aluminum case is durable and very efficient to cool out the internal heat

Accessories:
Standard
Temperature sensor cable
4mm gold banana plug with silicon cable
Charge graph program kit (CD + USB cable)

Optional
PB-5 link cable
External Resistor (R: 1 or 2 Ohm)

Lataa manuaali tästä (8mb PDF)