|
|
Sensors and accessories for Seagull |
 |
|
 |
| Displaying 1 to 16 (of 16 products) |
Result Pages: 1 |
| |
Product Name+ |
Price |
 |
5Hz GPS Expander Module
New Smaller, faster, and more sensitive GPS Expander Module plugs into the system to provide live and/or recorded lat/lon, ground speed, GPS altitude, distance to pilot, course, UTC timestamp, and more. |
129,00
Stock: 1
|
 |
Brushless RPM Sensor
Tiny sensor measures RPM by simply connecting a wire from one of your brushless electric motor leads to the sensor. This connection is just a tap (not inline) which simplifies installation. |
14,00
Stock: -2
|
 |
Custom Y Cable for Throttle Logging
Monitor Throttle or other servo movements with your eLogger V3! |
7,50
Stock: >10
|
 |
Cylinder head temperature thermocouple
CHT probe kit for use with OS #8 and 10mm plugs. Requires our Thermocouple Expander Board. Up to two Thermocouple probes can be plugged into the Expander simultaneously. |
27,30
Stock: 2
|
 |
Exhaust Gas Temperature Thermocouple Probe Kit
Requires our Thermocouple Expander Board. Up to two Thermocouple probes can be plugged into the Expander simultaneously. |
27,30
Stock: 1
|
 |
G-Force Expander Kit
Measures dual axis acceleration and G-force up to +/- 38 G's. |
69,50
Stock: 1
|
 |
Micro Temperature Sensor
Perfect for measuring temps of batteries and ESCs. 250 degrees F max temp. |
9,90
Stock: 9
|
 |
Motor (Loop) Temperature sensor
Loop-around temperature sensor measures temp up to 420 degrees F. Great for looping around motors.
NEW: The eLogger V3 supports up to two Hall Effects or Brushless RPM sensors! Up to three temperature sensors can be connected to the eLogger V3 simultaneously (two simultaneously for the V1/V2). |
9,90
Stock: -3
|
 |
NEW: Spektrum/JR (TM) Interface Cable
Now use your eLogger V3 to see Spektrum/ JR Rx holds/failsafes, lost frames, and antenna fades (up to 4 antennas) on your PowerPanel, or logged for later review!
Connects between your Spektrum "FlightLog" data port and the eLogger V3's GPS port. Use a servo Y cable to use your FlightLog display simultaneously! NOTE: make sure your RX has the data port before ordering. |
4,50
Stock: 5
|
 |
Optical RPM sensor
Measures your RPM without need for installing magnets. Note: This version is for the eLogger V3 and the V2, which we have been selling since early 2006. The eLogger V2 has the large white letters "V2" (or "U2") on the bottom of the circuit board, near the RPM/Temp pins. |
13,60
Stock: 8
|
 |
OSD Expander
Do you fly or race with video? The Eagle Tree OSD Expander provides a simple and easy way to display the data you need, in real time. |
40,40
Stock: 1
|
 |
RPM Sensor with 4 magnets
Hall Effects RPM Sensor with 4 magnets.
Measures RPM to 50K+. See the eLogger Instruction manual for details on how to use the Hall RPM Sensor.
NEW: The eLogger V3 supports up to two Hall Effects or Brushless RPM sensors! Hall Effects RPM Sensor with 4 magnets.
Measures RPM to 50K+. See the eLogger Instruction manual for details on how to use the Hall RPM Sensor.
NEW: The eLogger V3 supports up to two Hall Effects or Brushless RPM sensors! |
9,50
Stock: 5
|
|
RPM/Temperature Extension wire
12 (30 cm) 3 pin extension cable for our RPM and Temperature sensors |
4,60
Stock: 1
|
 |
Seagull Expander 2,4Ghz
2,4 Ghz telemetry display and transmitter for data logger. |
301,50
Stock: 1
|
 |
Servo Current Logger
Find out how much current one or more of your servos or other low current devices are drawing. Plugs into your eLogger and servo (or receiver battery/BEC) to log current from 0-5 Amps continuous, with 0.01 Amp resolution.
Daisy-chains with all other eLogger MicroSensors! |
23,20
Stock: 4
|
 |
Thermocouple Expander with Exhaust Gas Probe
Thermocouple Expander supports two type K thermocouple probes. Includes EGT thermocouple probe with compression fitting, for measuring up to 2000 degrees F. |
79,60
Stock: 1
|
| Displaying 1 to 16 (of 16 products) |
Result Pages: 1 |
|
|
|
