|
|
Sensors and Accessories for eLogger |
 |
|
 |
| Displaying 1 to 18 (of 18 products) |
Result Pages: 1 |
| |
Product Name+ |
Price |
 |
10Hz GPS Expander Module New Smaller, faster, and more sensitive GPS Expander Module plugs into the system to provide live and/or recorded lat/lon, ground speed, GPS altitude, distance to pilot, course, UTC timestamp, and more. |
88,50
Stock: 0
|
 |
Airspeed Expander Measures airspeed from approx 9-200 MPH. Includes Pitot Tube and hose.
Daisy-chains with all other eLogger MicroSensors! |
24,20
Stock: 2
|
 |
Airspeed MicrosensorTM V3 new Airspeed and Altitude MicroSensors have two modes: they work standalone with no additional equipment required, as well revving up your eLogger and PowerPanel LCD for full data logging. These precision instruments use pressure differential to measure Airspeed or Altitude. |
37,30
Stock: 0
|
 |
Altitude MicrosensorTM V3 new Airspeed and Altitude MicroSensors have two modes: they work standalone with no additional equipment required, as well revving up your eLogger and PowerPanel LCD for full data logging. These precision instruments use pressure differential to measure Airspeed or Altitude. |
37,30
Stock: 4
|
 |
Custom Y Cable for Throttle Logging Monitor Throttle or other servo movements with your eLogger V3! |
7,50
Stock: >10
|
|
Expander Extension wire 12 (30 cm) 4 pin extension cable for the PowerPanel |
4,60
Stock: 4
|
 |
Memory Expander for eLogger V1&V2 (NOT compatible with eLogger V3) Increases your eLogger's onboard logging time by 5x!
Daisy-chains with all other eLogger MicroSensors! |
23,20
Stock: 1
|
 |
Micro Temperature Sensor Perfect for measuring temps of batteries and ESCs. 250 degrees F max temp. |
9,90
Stock: 4
|
 |
Multi-Expander for eLogger V1&V2 (NOT compatible with eLogger V3) Expands your eLogger to support Brushless RPM, Throttle movement recording, and simultaneous recording of two temperatures. Includes integrated Brushless RPM sensor and Y cable for Throttle monitoring. Temperature sensors sold separately. |
19,20
Stock: 1
|
 |
NEW: Spektrum/JR (TM) Interface Cable Now use your eLogger V3 to see Spektrum/ JR Rx holds/failsafes, lost frames, and antenna fades (up to 4 antennas) on your PowerPanel, or logged for later review!
Connects between your Spektrum "FlightLog" data port and the eLogger V3's GPS port. Use a servo Y cable to use your FlightLog display simultaneously! NOTE: make sure your RX has the data port before ordering. |
4,50
Stock: 5
|
 |
Optical RPM sensor Measures your RPM without need for installing magnets. Note: This version is for the eLogger V3 and the V2, which we have been selling since early 2006. The eLogger V2 has the large white letters "V2" (or "U2") on the bottom of the circuit board, near the RPM/Temp pins. |
13,60
Stock: 5
|
 |
OSD Expander Do you fly or race with video? The Eagle Tree OSD Expander provides a simple and easy way to display the data you need, in real time. |
40,40
Stock: 0
|
 |
OSD Pro Expander The OSD Pro is the ultimate on-screen display for your FPV (First Person View) equipped recreational model airplane, heli, car or boat! The OSD Pro displays all the key information about your models status, and has many advanced features such as voice alerts, high resolution raster graphics, a new RADAR synthetic map, Return to Home, Artifical Horizon display, Acoustic Variometer, and waypoints within visual range. |
78,60
Stock: 2
|
 |
PowerPanel LCD display PowerPanel LCD Display for all eLogger versions |
32,50
Stock: 4
|
 |
RPM Sensor with 4 magnets Hall Effects RPM Sensor with 4 magnets.
Measures RPM to 50K+. See the eLogger Instruction manual for details on how to use the Hall RPM Sensor.
NEW: The eLogger V3 supports up to two Hall Effects or Brushless RPM sensors! Hall Effects RPM Sensor with 4 magnets.
Measures RPM to 50K+. See the eLogger Instruction manual for details on how to use the Hall RPM Sensor.
NEW: The eLogger V3 supports up to two Hall Effects or Brushless RPM sensors! |
9,50
Stock: 3
|
|
RPM/Temperature Extension wire 12 (30 cm) 3 pin extension cable for our RPM and Temperature sensors |
4,60
Stock: 1
|
 |
rushless RPM Sensor V2 Tiny sensor measures RPM by simply connecting a wire from one of your brushless electric motor leads to the sensor. This connection is just a tap (not inline) which simplifies installation. |
15,00
Stock: >10
|
 |
Servo Current Logger Find out how much current one or more of your servos or other low current devices are drawing. Plugs into your eLogger and servo (or receiver battery/BEC) to log current from 0-5 Amps continuous, with 0.01 Amp resolution.
Daisy-chains with all other eLogger MicroSensors! |
23,20
Stock: 1
|
| Displaying 1 to 18 (of 18 products) |
Result Pages: 1 |
|
|
|