Use RCL5324 to install 2 red & 2 green directional navigation lights; 2 white adjustable wingtip strobes; 2 white adjustable tail strobes; 2 red adjustable rotating beacon strobe lights; and 4 white landing lights (switched from the TX) to any 48" span R/C airplane, helicopter, or boat. Includes the NIGHTFLY™ 14 LED Controller that can be switched on/off from the TX using a spare 2-position switch. Use wire extensions for larger scale craft.

Powered directly from the RX or optional battery source

Everything needed for a complete installation is included with every lighting system!

- BRIGHTEST LEDs INDUSTRY WIDE
- ADJUSTABLE RATE STROBES & BEACON
- TX/RX CONTROL BUILT RIGHT IN
- SIMPLE & EASY INSTALLATION
- POWERS DIRECTLY FROM THE RX
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED
 

Includes              Replacement P/N            Instruction Set -
(1) NIGHTFLY™ 14 LED controller #5056 LED CONTROLLER
(1) 2-Channel RX Plug - POWER SOURCE
(8) 14" wire extensions #5390-14 WIRE LENGTHS
(6) 24" wire extensions #5390-24
(4) 5mm red constant LED #5290-R LED SIZES & COLORS
(2) 5mm green constant LED #5290-G
(8) 5mm white constant LED #5290-W
(14) chrome 5mm LED holders #5081 INSTALLATION
HARDWARE
(14) standard 5mm LED holders #5082
(14) 2P connector housings -
(1) 1.25"x0.5" aluminum tape x18 #5081
(1) 3.75"x3" aluminum tape #5080
(16) zip ties & bases #5080

Specs

SYSTEM CURRENT DRAW (@6V): 110mA with landing lights off; 170mA with landing lights on
(A standard servo draws approx. 350mA)

LED Controller
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA 
DIMENSIONS: 1.65" x 1.0" x 0.25"

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA